2277 Longyang Rd. Pudong, Shanghai, China info@mixingchina.com

Brief introduction to sandstone production line

    You are currently here!
  • Home
  • Blog Brief introduction to sandstone production line

Brief introduction to sandstone production line

June 6, 2023 nflg 0 Comments

Brief introduction to sandstone production line

Sandstone production line is a kind of specialized equipment for standstone of building material and stones, which is 50% advantage than traditional vertical shaft impact crushers in energe-conservation. It can make all kinds of rocks, sandstone, cobbles into sand for building purpose with outstanding features of perfect standy granularity, and very high compression strength, that performs better in meeting the requirement of building than natural sand and the stand produced by common hammer blasting machine, capable of improving the quality of construction. This equipment has the following features: reliable performance, reasonable design, easy to handle, high working effeciency. Manual sandstone production line gets suitable different specification stone by crushing, viberating and screening through feeding machine and jaw crusher , finished stand will be obtained by high effect sand washing machine.

Sandstone production line is defined according to discharging type, manufactured products including building stones and artificial sand,also called building stones production line, to be equivalent to the combination of building stone production line and sand machine. It often needs a shared sand and stone production line in raw material factory for road building and construction site. This set of sandstone production line equipment can fully meet the requirment of producing the building stones and artificial sand.

Following is the introduction to process of sandstone production line:

The stones is conveyed from viberation feeding machine to jaw crusher to make rough crush, the material after rough crushing is sent by belt conveyor to sand machine for further crushing, the precise crushing material is transported to viberation screen for screening, and then the material which have reached the granularity requirement of finished products is carried to sand washing machine for cleaning, after cleaning the finished products comes off the conveyor; those not meeting the granularity requirement will be reworked back from viberation screen to sand machine, forming a closed manifold cycles. The granularity of finished products can be combined and classified according to customers’ requirement. If choose to use dry manufacturing techniques, coarse powder and fine powder splitter, and dust-removing equipment can be prepared.

leave a comment