Diamond equipment carries Trio brand of Coarse Material Washers and Blade Mills which are ideally suited for thoroughly scrubbing and cleaning up to 2 1/2″ to 3″ Material. Built with large, three stage gearboxes and outboard lower bearing assemblies, the units are designed for long operating life and maintenance ease. The tubs of these Coarse Material Washers and Blade Mills are comprised of heavy gauge plate, and are designed for maximum life in various applications.
These Coarse Material Washers and Blade Mills can be operated with electric, hydraulic, or combustion power. Each unit comes complete with support legs, adjustable motor base, motor guard, lifting lugs and supports, and a v-belt guard.
Operating Principal The required water is introduced to wash out deleterious material over the tub end. Dust and clay and other indesirable feed components are eliminated from the fed material by this abrading and washing action.
Deleterious material with light specific gravity(wood, lignite, paper), are carried out of the tub by the rising current of water within the tub. For tougher applications, additional paddle configurations can be used in lieu of conveyor flights. This lengthens the material retention time in the machine and results in more extensive scrubbing in the tub.
Diamond Equipment‘s line of Coarse Material Washers and Blade Mills is available in a variety of sizes. Following are the specifications for the above model:
Screw Diameter: 22″
Tub Length: 18′
Capacity (TPH): 45 – 55
Maximum Material Size(inch): 2
Motor HP: 15
Operating Shaft Speed(RPM): 40
Machine Weight(lbs): 6050
Machine Weight(kgs): 2750
Diamond Equipment’s line of Coarse Material Washers and Blade Mills is available in a variety of sizes. Following are the specifications for the above model:
Screw Diameter: 44″
Tub Length: 20′
Capacity (TPH): 375 – 750
Maximum Material Size(inch): 3
Operating Shaft Speed(RPM): 26
Machine Weight(lbs): 22000 – 44000
Machine Weight(kgs): 10000 – 21000
Archives
Recent Posts
Categories
Calendar
Meta
Coarse Material Washer,coarse washing equipment
Diamond equipment carries Trio brand of Coarse Material Washers and Blade Mills which are ideally suited for thoroughly scrubbing and cleaning up to 2 1/2″ to 3″ Material. Built with large, three stage gearboxes and outboard lower bearing assemblies, the units are designed for long operating life and maintenance ease. The tubs of these Coarse Material Washers and Blade Mills are comprised of heavy gauge plate, and are designed for maximum life in various applications.
These Coarse Material Washers and Blade Mills can be operated with electric, hydraulic, or combustion power. Each unit comes complete with support legs, adjustable motor base, motor guard, lifting lugs and supports, and a v-belt guard.
Operating Principal The required water is introduced to wash out deleterious material over the tub end. Dust and clay and other indesirable feed components are eliminated from the fed material by this abrading and washing action.
Deleterious material with light specific gravity(wood, lignite, paper), are carried out of the tub by the rising current of water within the tub. For tougher applications, additional paddle configurations can be used in lieu of conveyor flights. This lengthens the material retention time in the machine and results in more extensive scrubbing in the tub.
Diamond Equipment‘s line of Coarse Material Washers and Blade Mills is available in a variety of sizes. Following are the specifications for the above model:
Screw Diameter: 22″
Tub Length: 18′
Capacity (TPH): 45 – 55
Maximum Material Size(inch): 2
Motor HP: 15
Operating Shaft Speed(RPM): 40
Machine Weight(lbs): 6050
Machine Weight(kgs): 2750
Diamond Equipment’s line of Coarse Material Washers and Blade Mills is available in a variety of sizes. Following are the specifications for the above model:
Screw Diameter: 44″
Tub Length: 20′
Capacity (TPH): 375 – 750
Maximum Material Size(inch): 3
Operating Shaft Speed(RPM): 26
Machine Weight(lbs): 22000 – 44000
Machine Weight(kgs): 10000 – 21000