Single cylinder hydraulic cone crusher
Single cylinder hydraulic cone crusher and the spring cone crusher working principle are basically the same, the main difference is the use of bottom single cylinder hydraulic adjustment of discharge mouth and hydraulic insurance, so it is called hydraulic cone crusher.
Single Cylinder Hydraulic Cone Crusher adopts the best combination of crushing frequency and eccentricity, so size of the crushed product is much smaller. Therefore, more crushing and less grinding efficiency is more significant, crushing and grindingpower consumption is reduced greatly. Perfect combination of high crushing efficiency and highly efficient chamber makes larger capacity than other crushers .
More materials are crushed by different layers, so size of final product is evenly cubic. Hydraulic adjustment and method for cleaning chamber make operation and maintenance much more convenient and automatic. This series of Single Cylinder Hydraulic Cone Crusher has much less trouble, and operating ratio is increased more than 85%, so the whole cost is reduced greatly.
Cone crusher main parts
The cone crusher comprises of upper frame and a lower frame 3 is composed of two parts. Under the frame of a center sleeve, inside straight bushing, an eccentric shaft sleeve 4 is arranged in the straight bushing, and the top surface of bearing support. The spindle is inserted in the eccentric sleeve 4 within the bore of the bushing, the lower end of the main shaft is supported on the spherical thrust bearing.
The middle part of the main shaft provided with a movable cone, cone sleeves outside of manganese steel lining, between cast zinc or epoxy resin, so close. The upper dustproof nut. Beam center sleeve is fitted inside the conical bushing, spindle head propped on the conical bushing on the cone surface.
The advantages of hydraulic crusher
Hydraulic Cone Crusher,designed and made through absorbing the world advanced crushing technology, has achieved world advanced level. It is widely applied to metallurgy, construction, hydropower, transport, chemical and building material industries and suitable for crushing variety of hard and above middle-hard ores and rocks.
1, Crushing machine is easy to check and repair. From the maintenance point of view, this machine adopts a new plane bearing, the bearing has high bearing capacity, and improve the lubrication system and dust sealing.
2, crusher liner wear, can ensure the cavity shape invariant, i.e. having a standard constant liner property.
3, using special alloy lining board, high wear resistance, improves the service life of liner.
4, with automatic overload protection system, type 8000 with a pressure limiting valve instead of other specifications of models by use of the energy storage device.
5, the lower frame body surface is provided with a manhole, convenient maintenance.
6, the lower frame body is provided with radial rib plates special steel plate.
7, using a self lubrication sealing ring, so that the dust can not enter inside the crusher.
8, use of spiral bevel gear drive, no noise, long service life and stable.