Vibro-King TLe screens are the latest in a long history of Telsmith vibrating screen excellence. Incorporating new technologies and packed with features, TL screens are the most reliable, low maintenance inclined screens in the mining and aggregates industries today.
With the TL screen, Telsmith takes a new approach to screen design and application. Recognizing that modern screen media takes many forms and is critical to achieving optimum performance, Telsmith builds each screen around the media selected for the application. Each deck may be custom selected for a different media type.
The screen selection process begins with identifying the media for each deck. Telsmith has designed deck frames specifically for performance and endurance with each media type (side tension wire cloth, urethane or rubber, modular urethane or rubber panels, punch plate or steel backed rubber). Once the media type, openings and deck frames are defined, side plate thickness is determined (3/8″ is standard while 1/2″ thick is used for larger screens with high load – heavy duty applications).
With an approximate live weight and load requirement determined, Telsmith selects the vibrator mechanism based on delivering outstanding bearing life while achieving the proper speed, stroke and “G” force for the application. Again, Telsmith has taken a modular approach with 110mm, 130mm and 160mm bearing vibrator mechanisms available in single and dual shaft assemblies, allowing outstanding flexibility and range.
The new Vibro-King TLe approach to screen design matches the vibrating screen and screen media as never before, creating outstanding performance and longevity. From heavy duty scalping of coarse stone to fine sizing of finished products, wet or dry processing, the Vibro-King TL is feature packed and built to deliver low cost performance as never
before.
TL shaft assembly:
Advanced technology:
Telsmith R&D has created the TL Never-WearTM sealing system. Using centrifugal force to cast oil away from the shaft casing eliminates the need for a contact lip seal. This eliminates the downtime and expense of repairing worn seals or shaft grooves. An inexpensive, snap-in, urethane labyrinth seal keeps dust out.
Low maintenance:
All TL shaft assemblies use wide series bearings for extended service life. In addition, the large shaft casing allows increased oil volumes reducing maintenance frequency.
Oil level sight gauges are located outside of the guard protected area. Built into the sight gauge are oil drain, oil fill and grease zerk fittings for quick maintenance, including oil changes, without removing the guard.
TL deck frame designs:
side tension deck: Designed for wire cloth (up to 1/2″ dia. wire) or side tension urethane or rubber panels. Fabricated with heavy tubing welded into formed channel sides creating a rigid deck that resists torsional deflection. 6″ discharge lips incorporate 3/8″ thick AR400 liner.
Modular urethane deck:
A flat deck designed for mounting urethane panels of almost any style. Fabricated with heavy tubing welded into formed
channel sides creates a rigid deck that resists torsional deflection. Telsmith will factory install customer supplied girders or rails at no charge. Telsmith recommends that the media be installed at the factory (nominal charge) to allow for
resonant frequency testing with the media installed. Discharge lip and side liners are sold separately and typically supplied with the media.
heavy duty j-beam deck: A heavy duty flat deck designed for mounting bolt-down punch plate or steel backed rubber media. The design utilizes a unique J-Beam concept that allows stone to fall without wearing on the structural members. Telsmith recommends that the media be installed at the factory (nominal charge) to allow for resonant frequency testing with the media installed. Discharge lip and side liners are bolt in 3/8″ thick AR400 or steel backed
rubber.
The J-Beam concept allows for deep and strong deck frame construction with minimal exposure of the structural cross
member to abrasive wear.
Archives
Recent Posts
Categories
Calendar
Meta
Vibro-king TLe screens equipment
Vibro-King TLe screens: vibrating screen
Vibro-King TLe screens are the latest in a long history of Telsmith vibrating screen excellence. Incorporating new technologies and packed with features, TL screens are the most reliable, low maintenance inclined screens in the mining and aggregates industries today.
With the TL screen, Telsmith takes a new approach to screen design and application. Recognizing that modern screen media takes many forms and is critical to achieving optimum performance, Telsmith builds each screen around the media selected for the application. Each deck may be custom selected for a different media type.
The screen selection process begins with identifying the media for each deck. Telsmith has designed deck frames specifically for performance and endurance with each media type (side tension wire cloth, urethane or rubber, modular urethane or rubber panels, punch plate or steel backed rubber). Once the media type, openings and deck frames are defined, side plate thickness is determined (3/8″ is standard while 1/2″ thick is used for larger screens with high load – heavy duty applications).
With an approximate live weight and load requirement determined, Telsmith selects the vibrator mechanism based on delivering outstanding bearing life while achieving the proper speed, stroke and “G” force for the application. Again, Telsmith has taken a modular approach with 110mm, 130mm and 160mm bearing vibrator mechanisms available in single and dual shaft assemblies, allowing outstanding flexibility and range.
The new Vibro-King TLe approach to screen design matches the vibrating screen and screen media as never before, creating outstanding performance and longevity. From heavy duty scalping of coarse stone to fine sizing of finished products, wet or dry processing, the Vibro-King TL is feature packed and built to deliver low cost performance as never
before.
TL shaft assembly:
Advanced technology:
Telsmith R&D has created the TL Never-WearTM sealing system. Using centrifugal force to cast oil away from the shaft casing eliminates the need for a contact lip seal. This eliminates the downtime and expense of repairing worn seals or shaft grooves. An inexpensive, snap-in, urethane labyrinth seal keeps dust out.
Low maintenance:
All TL shaft assemblies use wide series bearings for extended service life. In addition, the large shaft casing allows increased oil volumes reducing maintenance frequency.
Oil level sight gauges are located outside of the guard protected area. Built into the sight gauge are oil drain, oil fill and grease zerk fittings for quick maintenance, including oil changes, without removing the guard.
TL deck frame designs:
side tension deck: Designed for wire cloth (up to 1/2″ dia. wire) or side tension urethane or rubber panels. Fabricated with heavy tubing welded into formed channel sides creating a rigid deck that resists torsional deflection. 6″ discharge lips incorporate 3/8″ thick AR400 liner.
Modular urethane deck:
A flat deck designed for mounting urethane panels of almost any style. Fabricated with heavy tubing welded into formed
channel sides creates a rigid deck that resists torsional deflection. Telsmith will factory install customer supplied girders or rails at no charge. Telsmith recommends that the media be installed at the factory (nominal charge) to allow for
resonant frequency testing with the media installed. Discharge lip and side liners are sold separately and typically supplied with the media.
heavy duty j-beam deck: A heavy duty flat deck designed for mounting bolt-down punch plate or steel backed rubber media. The design utilizes a unique J-Beam concept that allows stone to fall without wearing on the structural members. Telsmith recommends that the media be installed at the factory (nominal charge) to allow for resonant frequency testing with the media installed. Discharge lip and side liners are bolt in 3/8″ thick AR400 or steel backed
rubber.
The J-Beam concept allows for deep and strong deck frame construction with minimal exposure of the structural cross
member to abrasive wear.