TRACK PLANT FEATURES
Vibrating Grizzly feeder – Feeding the materials into the jaw crusher and/or fines chute is a vibrating grizzly feeder including :-
Vibrating Unit – Twin shaft exciter is mounted under the rear of the vibrating feeder . They are driven by a single hydraulic motor and produces a forward linear motion.
Pan – The feeder floor is fitted with Hardox 400 bolted replaceable wear liners. These extend the quality and life of the feeder.
Grizzly Section – The grizzly section is a double step grizzly that is easily removed.
Feed Hopper – The feed hopper is manufactured from Hardox 400. To raise and lower the wings, hydraulic cylinders are used to bring the travelling height down to a minimum and allow for maintenance to the vibrating feeder.
Track Frame – is manufactured from heavy-duty frame steel with 3.8m longitudinal centres along with 400 wide tracks as a standard with an overall track width of 2.8m.
Forward Product conveyor – The forward product conveyor or main conveyor is a 1200mm wide, troughed belt conveyor with a fixed tail section and a discharge height of 3.3m high. The belt is driven via a hydraulic drive motor.
Side Discharge Conveyor – The side discharge dirt conveyor is hydraulic folding, 600mm wide giving a discharge height of approximately 2.1m to the top of the head drum. The belt is driven via a hydraulic drive motor.
Fines Transfer Chute – Fitted beneath the vibrating grizzly is the fines transfer chute. This chute transfers the material passing the grizzly bar setting onto either the forward product conveyor or the side discharge conveyor.
Magnet – A magnetic cross-belt separator is suspended over the on-plant product conveyor and is complete with permanent magnet and a hydraulic drive (optional).
Powerpack – CATERPILLAR model C9 engine with electronic governing and emission control powers the plant. Rated at 350 bHP (265 kW) @ 2000 rpm designed to drive the jaw via a hydraulic hydrostatic power take off.
Jaw Crusher – The 1100 x 650 Crusher provides the latest technology in Heavy Duty Crusher design that delivers high production, large feed opening, bolted mainframe and a cast swing jaw holder. The crusher is designed to handle hard rock, ores and demolition concrete for the quarrying and mining industries. Designed to compliment Track installations, these rugged machines are manufactured with heavy-duty parts for optimum operation and long life. The crusher is fully hydraulic adjustable on setting.
Extra Heavy Duty Body – The Jaw Crusher body is a four piece, fully bolted and doweled heavy duty structure. Both the front and rear frames are cast high strength steel with side plates produced from high strength structural plate.
Crushing Chamber – The jaws are a corrugated manganese jaw which are reversible, top to bottom. The swing jaw is a fully enclosed section of cast steel construction. The large diameter shaft is manufactured from forged steel with no threads or tapered bearing journals. Both the fixed and moving jaws are retained with a wedge locking system. The main frame and swing jaw holder are protected from wear due to the unique design of the jaw faces that completely protect the inlet and outlet points of the crushing chamber.
Options – Special features are available depending on the client’s requirements. A conveyor weigh scale can be fitted along with extended hopper wings for an improved size in feeding area.