Barite, also called baryte, is a non-metallic mineral product with barium sulfate(BaSO4) as the main component. The name of barite comes from the Greek word barys, which means heaviness and implies the weight of this mineral. Because the specific gravity of barite is as high as 4.5, which is very rare in non-metallic minerals. Next, let’s get to know the unique barite.
1. Barite forms
Barite belongs to the orthorhombic crystal system, and the crystals are more common in parallel {001} plate-like crystals, sometimes in columnar shapes; often appear as clusters, blocks, granular and other aggregates.
Desert rose mainly refers to mineral aggregates with special forms. Barite can also form aggregates similar to rosettes.
2. Barite grade
Based on purity and specific gravity, barite has been classified into Sp. Gr. up to 3.9, Sp. Gr. 4.0, Sp. Gr. 4.1, Sp. Gr.4.2, and Sp. Gr. 4.3 and above. Each grade is used for certain specific applications.
Grade 3.9: Barite grade up to 3.9 signifies specific gravity of 3.9. Barite is formed by 50/50 ratio of barite and other alternative weighing material such as ilmenite and hematite.
Grade 4.0: Barite grade 4.0 signifies a low-grade oilfield barite with specific gravity of 4.0. Its composition includes 85% to 90% of BaSO4.
Grade 4.1: Barite grade 4.1 signifies specific gravity of 4.1. Its composition includes minimum 90% BaSO4, maximum 2% SiO2, maximum 0.25% Fe2O3 and moisture.
Grade 4.2: Barite grade 4.2 signifies specific gravity of 4.2. Its composition includes minimum 90% BaSO4, maximum 2% SiO2, maximum 0.25% Fe2O3 and 1% moisture.
Grade 4.3: Barite grade 4.3 signifies specific gravity of 4.3. Its composition includes up to 95% of BaSO4, 0.5% of SiO2, 1.2% of Fe2O3 and 0.15% moisture.
Grade 4.4 and above: Barite grade 4.4 and above signifies specific gravity of 4.4 and more than 4.4 g/m3. Its composition includes more than 95% of BaSO4, 0.5% of SiO2, 1.2% of Fe2O3 and 0.15% moisture.
The easy way to measure the quality of barite is to look at the transparency of barite. High-quality ones are colorless and transparent. Those containing impurities will be dyed in various colors, often gray, light red, light yellow, etc.
3. Physical and Chemical Properties of Barite
Chemical composition
Mainly BaSO4, may contain calcium and other impurities
The main component of barite is barium sulfate which is neither soluble in water nor acid, so even if it is eaten in the stomach, it will not produce toxic barium ions.
However, if the human body absorbs pure barium sulfate powders, it can cause pain and tightness in the chest, coughing, etc. Long-term inhalation can cause barium pneumoconiosis. Barium sulfate powder can also stimulate the eyes.
Hydrothermal barite deposits are often found in the fractured structures of sedimentary rocks, metamorphic rocks, and magmatic rocks in the form of steeply inclined veins.
Barite ore bodies appear in groups and belts, ranging from tens of meters to more than 2,000 meters in length, and extending from tens to hundreds of meters in depth. The mineral composition in hydrothermal barite ore is relatively simple. According to the mineral composition, there are five combinations of hydrothermal barite ore: barite single mineral composition, quartz-barite combination, fluorite-barite combination, polymetallic sulfide-barite combination, witherite-barytocalcite-barite combination. It is often associated with lead, zinc, copper, pyrite, fluorite, witherite, etc.
The mineral composition in hydrothermal barite ore is relatively simple. According to the mineral composition, there are five combinations of hydrothermal barite ore: barite single mineral composition, quartz-barite combination, fluorite-barite combination, polymetallic sulfide-barite combination, witherite-barytocalcite-barite combination. It is often associated with lead, zinc, copper, pyrite, fluorite, witherite, etc.
There are small and medium-sized hydrothermal barite deposits, which have tremendous industrial value.
6.2 Bedded Barite Deposits
The bedded barite deposits can also be called layered deposits according to their occurrence characteristics. Such deposits are formed in the Early and Middle Paleozoic sedimentary rock series. The individual beds of barite are layered, layered-like, and lenticular and range in thickness from a few inches to about 10 feet, with color generally light to dark grey. Sedimentary barite is associated with quartz and chert; pyrite and secondary iron oxides; dolomite, calcite, siderite, witherite and strontianite; and clay minerals.
There are large-scale, medium-scale and small-scale sedimentary barite deposits, which have certain industrial value.
6.3 Bedded-Volcanic Barite Deposits
Volcanic sedimentary barite deposits are mostly distributed in the Neoproterozoic metamorphic rock series of the Qilian Fold System. The main minerals and associated minerals are barite, pyrite, chalcopyrite, galena, sphalerite, hematite, fluorite, witherite, calcite, dolomite, quartz, etc. In addition, volcanic-sedimentary barite deposits also occur around clay nodules, sedimentary rock formations, and hot springs.
There are large-scale, medium-scale, and small-scale volcanic sedimentary barite deposits. They all have a practical industrial value.
6.4 Residual Barite Deposits
After the primary barite deposits have been exposed to the surface, under the action of continuous and alternating weathering, denudation, and leaching, the residual barite ore formed. Residual barite mines have an area of thousands to hundreds of thousands of square meters, a thickness of tens of centimeters to three meters, and a buried depth of tens of centimeters to two meters. Residual barite contains a large amount of surrounding rock fragments, clay, and a small amount of quartz and calcite.
Residual barite deposits are mostly small in scale, rarely medium-sized, and have low industrial significance.
The barite resources are rich worldwide, with proven barite reserves of 2 billion tons. And the distribution of resources is relatively concentrated. The global barite resources are only distributed in a few countries such as China, Kazakhstan, Turkey, India, Iran, and the United States. China ranks first in the world.
7. Barite uses/ Barite applications
Barite is a very important non-metallic mineral raw material, which has a wide range of industrial applications.
Barite drilling mud: Fine barite powder can be used as a weighting agent for oil and gas well drilling mud to balance the mud weight with the pressure of underground oil and gas, avoiding blowout accidents. The current standard for barite as a weighting agent stipulated by the American Petroleum Institute (API) is as follows:
Density
Min. 4.20 g/cm3
Soluble hardness (as calcium)
Max. 250 mg/kg
Particles >75 um (wet screen)
Max. 3 wt%
Particles <6 um (sedimentation)
Max. 3 wt%
Various barium compounds: Barium compounds can be produced from barite, such as barium oxide, barium carbonate, barium chloride, barium nitrate, precipitated barium sulfate, barium hydroxide, etc. They are used to increase the refractive index of glass, the configuration of glaze in ceramics, agricultural pesticides and, so on.
Filler: In the paint industry, fillers added in barite powder can increase the film thickness, strength, and durability. Fillers with barite also can improve the performance of rubbers, papers, and plastics.
Lithopone pigment: Lithopone is a high-quality white pigment used as a raw material for paints and paint pigments. The white paint made with it has more advantages for indoor use than those with zinc-lead white pigment and magnesia white pigment.
Radiation-proof cement, mortar, and concrete: Due to its ability to absorb X-rays, barite can make barium cement, barite mortar, and barite concrete to replace metal lead plates to shield nuclear reactors and build scientific research and hospital X-ray-proof buildings.
Road construction: The asphalt mixture containing rubber and about 10% barite has been successfully applied in parking lots and is a durable paving material. When remanufacturing the tires of some heavy road construction equipment, barite is added to increase the weight, which is conducive to the consolidation of the fill area.
Other uses: Barite is the main source of barium which is the getter and binder for TVs and other vacuum tubes.
Barium can be alloyed with other metals (aluminum, magnesium, lead, calcium) to make barium alloys for bearing manufacturing.
8. Grade of Barite Products in International Trade
In international trade, barite is generally divided into three grades according to different uses. The details are as follows:
GradeIndex
Grade
Index
Drilling mud grade
Density≥4.2g/cm, BaSO4≥92%, 200 mesh sieve residue is less than 3%, 325 mesh sieve residue is less than 5%
Chemical grade
BaSO4> 95%, Fe2O3 and SrSO4 content does not exceed 1%, small trace silicon oxide and calcium oxide
Paint grade
BaSO4 >95%, high whiteness, fineness of at least 325 mesh
9. Purification Technology of Barite
Barite resources with high quality and singleness are relatively few and are depleting; Most barite ores are closely related to other metal minerals; Different barite products have different requirements of barite. Therefore, barite purification technology is needed to improve the industrial utilization value of associated barite ore.
9.1 Manual beneficiation
Manual beneficiation for barite ores with high BaSO4 content. After coarse crushing, the massive barite rocks are selected manually because the color and density of barite and associated minerals are different.
The manual separation method is simple, convenient, low at cost. But it has low production efficiency, thus causing a great waste of resources.
9.2 Magnetic beneficiation
When barite coexists with siderite, magnetite, hematite, and other iron minerals, magnetic separation is an effective beneficiation method. It helps to obtain high-purity barite, which can make barium-based drugs.
9.3 Gravity beneficiation
Barite ore is often closely associated with other metallic and non-metallic ores in the process of mineralization. According to the different densities between barite and other minerals, gravity beneficiation can be used to purify barite. The process includes ore washing, desliming, screening, jigging, rotation, and other process methods.
9.4 Flotation
Gravity separation is the preferred barite beneficiation method, but it is difficult to separate barite complex mineral composition effectively only by gravity separation. Therefore, for barite ore with complex mineral composition, the gravity-flotation or flotation should be adopted.
9.5 Calcination
In the process of mineralization, barite minerals are easy to be mixed with impurities such as Fe2O3, TiO2, and organic matter, which will make barite gray, green or, blue, affect the purity and whiteness of barite, and seriously reduce the application value of barite. Calcination can effectively remove impurities that can be decomposed and volatilized at high temperatures, improving the whiteness and purity of barite.
In practice, the beneficiation and purification method of barite depends on mine type, raw ore property, mine scale, barite use, etc.
Archives
Recent Posts
Categories
Calendar
Meta
Interesting Facts You Should Know about Barite
Barite, also called baryte, is a non-metallic mineral product with barium sulfate(BaSO4) as the main component. The name of barite comes from the Greek word barys, which means heaviness and implies the weight of this mineral. Because the specific gravity of barite is as high as 4.5, which is very rare in non-metallic minerals. Next, let’s get to know the unique barite.
1. Barite forms
Barite belongs to the orthorhombic crystal system, and the crystals are more common in parallel {001} plate-like crystals, sometimes in columnar shapes; often appear as clusters, blocks, granular and other aggregates.
Desert rose mainly refers to mineral aggregates with special forms. Barite can also form aggregates similar to rosettes.
2. Barite grade
Based on purity and specific gravity, barite has been classified into Sp. Gr. up to 3.9, Sp. Gr. 4.0, Sp. Gr. 4.1, Sp. Gr.4.2, and Sp. Gr. 4.3 and above. Each grade is used for certain specific applications.
Grade 3.9: Barite grade up to 3.9 signifies specific gravity of 3.9. Barite is formed by 50/50 ratio of barite and other alternative weighing material such as ilmenite and hematite.
Grade 4.0: Barite grade 4.0 signifies a low-grade oilfield barite with specific gravity of 4.0. Its composition includes 85% to 90% of BaSO4.
Grade 4.1: Barite grade 4.1 signifies specific gravity of 4.1. Its composition includes minimum 90% BaSO4, maximum 2% SiO2, maximum 0.25% Fe2O3 and moisture.
Grade 4.2: Barite grade 4.2 signifies specific gravity of 4.2. Its composition includes minimum 90% BaSO4, maximum 2% SiO2, maximum 0.25% Fe2O3 and 1% moisture.
Grade 4.3: Barite grade 4.3 signifies specific gravity of 4.3. Its composition includes up to 95% of BaSO4, 0.5% of SiO2, 1.2% of Fe2O3 and 0.15% moisture.
Grade 4.4 and above: Barite grade 4.4 and above signifies specific gravity of 4.4 and more than 4.4 g/m3. Its composition includes more than 95% of BaSO4, 0.5% of SiO2, 1.2% of Fe2O3 and 0.15% moisture.
The easy way to measure the quality of barite is to look at the transparency of barite. High-quality ones are colorless and transparent. Those containing impurities will be dyed in various colors, often gray, light red, light yellow, etc.
3. Physical and Chemical Properties of Barite
Note: barite can absorb X-rays and γ rays.
4. Is barite a hazardous material?
The main component of barite is barium sulfate which is neither soluble in water nor acid, so even if it is eaten in the stomach, it will not produce toxic barium ions.
However, if the human body absorbs pure barium sulfate powders, it can cause pain and tightness in the chest, coughing, etc. Long-term inhalation can cause barium pneumoconiosis. Barium sulfate powder can also stimulate the eyes.
5. Associated minerals of barite
Fluorite, calcite, quartz, sphalerite, vanadinite, pyrite, galena, dolomite, antimonite, chalcopyrite, clay minerals, hematite, siderite, specularite, witherite, sulfide, etc.
6. Geology of the Barite Deposits
6.1 Hydrothermal Barite Deposit
Hydrothermal barite deposits are often found in the fractured structures of sedimentary rocks, metamorphic rocks, and magmatic rocks in the form of steeply inclined veins.
Barite ore bodies appear in groups and belts, ranging from tens of meters to more than 2,000 meters in length, and extending from tens to hundreds of meters in depth. The mineral composition in hydrothermal barite ore is relatively simple. According to the mineral composition, there are five combinations of hydrothermal barite ore: barite single mineral composition, quartz-barite combination, fluorite-barite combination, polymetallic sulfide-barite combination, witherite-barytocalcite-barite combination. It is often associated with lead, zinc, copper, pyrite, fluorite, witherite, etc.
The mineral composition in hydrothermal barite ore is relatively simple. According to the mineral composition, there are five combinations of hydrothermal barite ore: barite single mineral composition, quartz-barite combination, fluorite-barite combination, polymetallic sulfide-barite combination, witherite-barytocalcite-barite combination. It is often associated with lead, zinc, copper, pyrite, fluorite, witherite, etc.
There are small and medium-sized hydrothermal barite deposits, which have tremendous industrial value.
6.2 Bedded Barite Deposits
The bedded barite deposits can also be called layered deposits according to their occurrence characteristics. Such deposits are formed in the Early and Middle Paleozoic sedimentary rock series. The individual beds of barite are layered, layered-like, and lenticular and range in thickness from a few inches to about 10 feet, with color generally light to dark grey. Sedimentary barite is associated with quartz and chert; pyrite and secondary iron oxides; dolomite, calcite, siderite, witherite and strontianite; and clay minerals.
There are large-scale, medium-scale and small-scale sedimentary barite deposits, which have certain industrial value.
6.3 Bedded-Volcanic Barite Deposits
Volcanic sedimentary barite deposits are mostly distributed in the Neoproterozoic metamorphic rock series of the Qilian Fold System. The main minerals and associated minerals are barite, pyrite, chalcopyrite, galena, sphalerite, hematite, fluorite, witherite, calcite, dolomite, quartz, etc. In addition, volcanic-sedimentary barite deposits also occur around clay nodules, sedimentary rock formations, and hot springs.
There are large-scale, medium-scale, and small-scale volcanic sedimentary barite deposits. They all have a practical industrial value.
6.4 Residual Barite Deposits
After the primary barite deposits have been exposed to the surface, under the action of continuous and alternating weathering, denudation, and leaching, the residual barite ore formed. Residual barite mines have an area of thousands to hundreds of thousands of square meters, a thickness of tens of centimeters to three meters, and a buried depth of tens of centimeters to two meters. Residual barite contains a large amount of surrounding rock fragments, clay, and a small amount of quartz and calcite.
Residual barite deposits are mostly small in scale, rarely medium-sized, and have low industrial significance.
The barite resources are rich worldwide, with proven barite reserves of 2 billion tons. And the distribution of resources is relatively concentrated. The global barite resources are only distributed in a few countries such as China, Kazakhstan, Turkey, India, Iran, and the United States. China ranks first in the world.
7. Barite uses/ Barite applications
Barite is a very important non-metallic mineral raw material, which has a wide range of industrial applications.
Barite drilling mud: Fine barite powder can be used as a weighting agent for oil and gas well drilling mud to balance the mud weight with the pressure of underground oil and gas, avoiding blowout accidents. The current standard for barite as a weighting agent stipulated by the American Petroleum Institute (API) is as follows:
Various barium compounds: Barium compounds can be produced from barite, such as barium oxide, barium carbonate, barium chloride, barium nitrate, precipitated barium sulfate, barium hydroxide, etc. They are used to increase the refractive index of glass, the configuration of glaze in ceramics, agricultural pesticides and, so on.
Filler: In the paint industry, fillers added in barite powder can increase the film thickness, strength, and durability. Fillers with barite also can improve the performance of rubbers, papers, and plastics.
Lithopone pigment: Lithopone is a high-quality white pigment used as a raw material for paints and paint pigments. The white paint made with it has more advantages for indoor use than those with zinc-lead white pigment and magnesia white pigment.
Radiation-proof cement, mortar, and concrete: Due to its ability to absorb X-rays, barite can make barium cement, barite mortar, and barite concrete to replace metal lead plates to shield nuclear reactors and build scientific research and hospital X-ray-proof buildings.
Road construction: The asphalt mixture containing rubber and about 10% barite has been successfully applied in parking lots and is a durable paving material. When remanufacturing the tires of some heavy road construction equipment, barite is added to increase the weight, which is conducive to the consolidation of the fill area.
Other uses: Barite is the main source of barium which is the getter and binder for TVs and other vacuum tubes.
Barium can be alloyed with other metals (aluminum, magnesium, lead, calcium) to make barium alloys for bearing manufacturing.
8. Grade of Barite Products in International Trade
In international trade, barite is generally divided into three grades according to different uses. The details are as follows:
Grade Index
9. Purification Technology of Barite
Barite resources with high quality and singleness are relatively few and are depleting; Most barite ores are closely related to other metal minerals; Different barite products have different requirements of barite. Therefore, barite purification technology is needed to improve the industrial utilization value of associated barite ore.
9.1 Manual beneficiation
Manual beneficiation for barite ores with high BaSO4 content. After coarse crushing, the massive barite rocks are selected manually because the color and density of barite and associated minerals are different.
The manual separation method is simple, convenient, low at cost. But it has low production efficiency, thus causing a great waste of resources.
9.2 Magnetic beneficiation
When barite coexists with siderite, magnetite, hematite, and other iron minerals, magnetic separation is an effective beneficiation method. It helps to obtain high-purity barite, which can make barium-based drugs.
9.3 Gravity beneficiation
Barite ore is often closely associated with other metallic and non-metallic ores in the process of mineralization. According to the different densities between barite and other minerals, gravity beneficiation can be used to purify barite. The process includes ore washing, desliming, screening, jigging, rotation, and other process methods.
9.4 Flotation
Gravity separation is the preferred barite beneficiation method, but it is difficult to separate barite complex mineral composition effectively only by gravity separation. Therefore, for barite ore with complex mineral composition, the gravity-flotation or flotation should be adopted.
9.5 Calcination
In the process of mineralization, barite minerals are easy to be mixed with impurities such as Fe2O3, TiO2, and organic matter, which will make barite gray, green or, blue, affect the purity and whiteness of barite, and seriously reduce the application value of barite. Calcination can effectively remove impurities that can be decomposed and volatilized at high temperatures, improving the whiteness and purity of barite.
In practice, the beneficiation and purification method of barite depends on mine type, raw ore property, mine scale, barite use, etc.