Jig equipments overview
NFLG Jig concentrators, Jig Separators have an outstanding history of long and consistent performance of proven high yield of Diamonds, Color Gemstone, Gold, Base Metals, Heavy Metals & other Heavy Minerals recovery, with minimal loss, maintaining maximum profitability in the ore concentrating process.
The usage of Jigs separators, Jig concentrators to concentrate and recover minerals of all kinds is widely practiced within the industry, based on the fact that the high specific gravity differential makes very good recoveries possible, with very little operating attention. NFLG Jig concentrators, Jig separators have the ability to absorb large fluctuations in ore Grade, Tonnage rate, and Dilution, without any effect on the final recovery of minerals concentrate.
NFLG Jig separators, Jig Concentrators do not require clean water, works with recycled water. NFLG Jig separators are easy to install, operate and maintain, with highest rate of minerals recovery, designed for continuous concentration and recovery, without operator interference.
NFLG Jig concentrators are fabricated with highest quality material, built to last, and supplied with ONE-YEAR manufacturer warrantee. They are extremely reliable and require minimum amount of maintenance.
NFLG Jig Concentrators are manufactured in seven models with capacities range of 18 m3 / hour slurry (6 tons / hour solids), up to 300 m3 / hour (100 tons / hour solids), per Jig separator.
Jig Concentrators, Jig separators application
NFLG Jig Concentrators, Jig separators are designed for the following applications:
To recover Finished Concentrate from ores in which the mineral grains are liberated. Recovery of minerals of various kinds that occur in Placer / Alluvial deposits, or decomposed rocks.
Recovery of minerals from primary/ hard rock ore, which can be liberated by crushing/ grinding process, i.e. (Diamonds, Color Gemstones, Barite, Gold & other precious metals, base metals, ferrous metals, light metals, coal) and heavy minerals of all kind.
Cobbling operation, to discard waste rock before final processing of the crude concentrate.
Jigging Machine Products Description
Jigging machine belongs to gravity-based equipments, which can separate mineral based on differing of specific gravity. “Gandong” saw-tooth wave jig is mainly consist of three parts: main frame, driving set and jigging chamber.
Jigging machine Application
Jigging machine is widely used in gravity concentration of tin, tungsten, placer gold, hematite ore, manganese, titanium, antimony, lead, tantalum, niobium and other minerals.
Jigging machine Features
The pulsing curve of the traditional jig is sinusoidal waveform, the up and down speed of water flow and acting time produced by the movement of membrane are almost same, so it is unfavorable to loose of jig bed and layering of minerals based on special gravity, and thus affect separation ability and recovery rate. Saw-tooth wave is an energy economy gravity equipment that is developed and improved from traditional jig on the basis theory of jig bed layering. Its jigging pulsating curve is similar to saw-tooth wave, which makes the up speed of water flow quicker than down speed of water flow, so it can improve looseness of jig bed and reduce suction action, which can lead to fully settlement of heavy particles in slurry, it highly improves separation ability and recovery rate. Stroke and frequency of stroke are adjustable.