Vertical roller mill with 3 rollers, roller di-ameter 670 mm, for the comminution of bulk materials in closed circuit, returns dis-charge is possible.
– with hot gas generator
– product grain size: screens from D98 = 20 μm-120 μm
– necessary material quantity: 3-5 t

Vertical roller mill with 2 rollers, roller di-ameter 200 mm for the comminution of bulk materials in closed circuit, returns discharge is impossible.
– product grain size: screens from D98 = 40 μm-150 μm
– necessary material quantity: min. approx. 50 kg

ball mill (continuously) ø 1.2 x 3.0 m, 2.5 m or 2.0 m for the comminution of bulk materials in closed and open circuit.
– with filter or separator
– product grain sizes: screens from D98 = 5 μm-150 μm (dry) and from D98 = 100 μm-150 μm (wet)
– necessary material quantity: 3-5 t (dry) / min. 5 t (wet)

Rod mill (continuously) ø 1.2 x 2.0 m for the comminution of bulk materials in closed and open circuit, dry and wet.
– with filter or separator
– product grain sizes: variable screens D98 = 100 μm-150 μm, open ∞
– necessary material quantity: min. 5 t

Ball mill or rod mill (continuously) ø 0.6 x 0.7 m for the comminution of bulk materials in closed and open circuit, dry and wet.
– with filter or hydro cyclone
– product grain sizes: variable screens D98 = 30 μm-100 μm
– necessary material quantity: min. 300-500 kg

Rod mill ø 0.3 x 0.6 m for batch grinding to determine the work index according to Bond for rod mills.
– optionally for power determination in batch mode
– necessary material quantity: min. 20 kg

Ball grinding mill ø 0.3 x 0.3 m for batch grinding to determine the work index according to Bond for ball mills.
– necessary material quantity: min. 15-20 kg

Ball mill ø 0.8 x 0.9 m for batch grinding for the comminution of bulk materials.
– specifying specific grinding energy at dif-ferent product finenesses
– product generation up to 500 kg, necessary material quantity: 70 kg

Ball mill ø 0.5 x 0.4 m for batch grinding, for non-ferrous comminution of bulk materials.
– specifying specific grinding energy at dif-ferent product finenesses
– product generation up to 100 kg,
– necessary material quantity: min. 20-25 kg

Ball mill ø 0.5 x 0.4 m, for batch grinding for the comminution of bulk materials.
– specifying specific grinding energy at dif-ferent product finenesses
– product genera-tion up to 100 kg,
– necessary material quantity: min. 20-25 kg

Drum dryer (continuously) diameter 0.8 m / length 5.0 m, for drying bulk materials.
– can optionally be used as a mixing drum
– with various internals
– necessary material quantity: min. 1-2 t

jaw crusher with jaw width 220 mm and jaw depth 180 mm for the comminution of non-ferrous bulk materials.
– minimum crushing gap 5 mm
– capacity depending on material between 300-500 kg/h