2277 Longyang Rd. Pudong, Shanghai, China info@mixingchina.com

Rod mill and rod grinding machine

    You are currently here!
  • Home
  • Blog Rod mill and rod grinding machine

Rod mill and rod grinding machine

May 12, 2023 nflg 0 Comments

Rod Mill Description

Rod mill has dry and wet two types to choose, Users shall make choice depending on the actual Requirement. The company uses the advanced output controllable technology, with the face milling Material set the suitable miller, change the traditional surface contact into line contact, make The output granularity evener, high product, widely used in chemical industry, metallurgy, glassed Industry, and the high fineness requirement of milling industry milling, sand making of building rod mill working principle Rod milling type system pressure-blasting machine by motor through reducer and peripheral big gear transmission or by low-speed synchronous motor directly through the surrounding big gear transmission, drive barrel rotary.

Rod Mill appplied to metal and nonmetal imne,water conservancy and glass building materials for grinding various ore,rock.

The grinding medium in centrifugal force and friction force, under the action of was promoted to a certain height, fall or discharge is thrown down state falling. By grinding materials by giving ore mouth continuous into the cylinder, be movement of the internal grinding medium crushing, and through the overflow and continuous gives the ore power of products, from a cake layer.

Rod Mill–bar Mill Application

Rod mill is applied to metal and nonmetal mine ,water conservancy and glass building materials for grinding various ore ,rock and artificial sand which needs even product granularity ,the energy-eddicient rod mill that our company produces is all that rolling bearing support instead of bearing bush slip bearing support.

Rod mill are generally used to grind material 1/4 inch and finer, down to the particle size of 20 to 75 microns. To achieve a reasonable efficiency, they must be operated in a closed system, with oversize material continuously being recirculated back into the mill to be reduced. It is widely used in building material,ceramic raw material, chemical industry, etc,can be used both dry and wet.

Rod Mill–Bar Mill Features

1.It is an efficient tool for grinding many materials into fine powder.

2.Widely used in building material, and chemical industry.

3.Can be used both dry and wet.

4.As the barrel rotates, the material is crushed between the individual pieces of grinding media that mix and crush the product into fine powder over a period of several hours.

5.The longer the ceramic mill runs, the finer the powder will be.

6.Our rod mill have been used to grind glass, powder food products, create custom varnishes, make ceramic glaze, powder various chemicals.

Rod mills Working Principle

The rod mill is a horizontal rotating device transmitted by the outer gear. The materials are transferred to the grinding chamber through the quill shaft uniformly. There are ladder liner and ripple liner and different specifications of ceramic ball in the chamber. The centrifugal force caused by rotation of barrel brings the ceramic ball to a certain height and impact and grind the materials. The ground materials are discharged through the discharging board thus the grinding process is finished

leave a comment