The XR400 incorporates the remarkable performance of the Pegson 1100×650 Premiertrak hydraulic adjust jaw crusher . This will give exceptional levels of throughput, reduction and reability.
The XR400 mobile crusher Features:
· Pegson “M” series single toggle jaw.
· High throughput capacities up to 400 tph.
· Aggressive crushing action with high swing jaw.
· Hydraulic crusher overload systemideal for applications with uncrushable material in feed up to 200mm cube in feed.
· Hydraulic unblocking facility.
· Very low fuel consumption, typically only 22 litres/hour depending on application, due to highly efficient hydraulic fluid
The XR400 is recommended for applications where there is a risk of steel or other uncrushable material in the feed up to 200 mm cube. The crusher will self protect and open in the event of this creating a crusher overload.
The XR400 Mobile CrusherOptions:
· Extended one piece hydraulic folding hopper.
· Fixed 15 mm thick Hardox feed hopper liners can be supplied fitted to the internal rear and side of the feed hopper (available on the standard feed hopper only).
· Wire mesh for underscreen.
· Multi tooth jaw plates in lieu of super tooth profile.
· Premium jaw plates in lieu of super tooth profile.
· Deflector plate under crusher.
· Hydraulically folding 600 mm wide side/dirt stockpile conveyor with a operated direct drive system.
· Low running cost due to direct crusher drive and efficient plant control.
· Quick set up time.
· Maximum mobility with heavy duty, low ground pressure crawler track.
· 1100×650 mm feed opening.
· Hydraulic CSS adjustment from 50 to 125 mm.
· Hydraulic folding feed hopper with wedge fixing system.
· Feed hopper capacity 10.0 m³.
· 4080×1060 mm vibrating feeder .
· 2-deck preliminary screenbox. Top deck – 2120×1060 mm Grizzly, bottom deck – rubble blanking mat or various aperture wire mesh
(available as optional extra).
· A two-way dirt chute is provided to discharge to the product conveyor or the optional dirt conveyor when fitted.
· Caterpillar C9 Tier III Acert diesel engine developing 172kW (230 hp) @ 1800 rpm.
· 1000 mm wide plain troughed product conveyor with a discharge height of 3905 mm.
· Product conveyor can be hydraulically raised and lowered for transport and maintenance purposes.
· Excellent under crusher access for removal of wire with hydraulic tilting conveyor system
· A hard wired umbilical control unit for the track motion, feeder stop/start and a stop button for the plant.
· Dust suppression sprays fitted as standard.
· Operator walkways and access ladder discharge height of 2300 mm.
· Overband magnetic separator with permanent magnet suspended over the main on plant product conveyor and complete with hydraulic drive.
· Single idler belt weigher with integrator and speed sensing wheel fitted to the main product conveyor.
· Hydraulic driven water pump assembly to provide a pressurized water supply to the dust suppression system.
· Plant mounted hydraulic pick breaker fitted to the side of the chassis.
· Electric re-fuelling pump kit.
· Radio remote control.
· Engine fire extinguisher system.
· Plant lighting mast.
Archives
Recent Posts
Categories
Calendar
Meta
Track mounted fully mobile primary jaw crushing plant
The XR400 incorporates the remarkable performance of the Pegson 1100×650 Premiertrak hydraulic adjust jaw crusher . This will give exceptional levels of throughput, reduction and reability.
The XR400 mobile crusher Features:
· Pegson “M” series single toggle jaw.
· High throughput capacities up to 400 tph.
· Aggressive crushing action with high swing jaw.
· Hydraulic crusher overload systemideal for applications with uncrushable material in feed up to 200mm cube in feed.
· Hydraulic unblocking facility.
· Very low fuel consumption, typically only 22 litres/hour depending on application, due to highly efficient hydraulic fluid
The XR400 is recommended for applications where there is a risk of steel or other uncrushable material in the feed up to 200 mm cube. The crusher will self protect and open in the event of this creating a crusher overload.
The XR400 Mobile Crusher Options:
· Extended one piece hydraulic folding hopper.
· Fixed 15 mm thick Hardox feed hopper liners can be supplied fitted to the internal rear and side of the feed hopper (available on the standard feed hopper only).
· Wire mesh for underscreen.
· Multi tooth jaw plates in lieu of super tooth profile.
· Premium jaw plates in lieu of super tooth profile.
· Deflector plate under crusher.
· Hydraulically folding 600 mm wide side/dirt stockpile conveyor with a operated direct drive system.
· Low running cost due to direct crusher drive and efficient plant control.
· Quick set up time.
· Maximum mobility with heavy duty, low ground pressure crawler track.
· 1100×650 mm feed opening.
· Hydraulic CSS adjustment from 50 to 125 mm.
· Hydraulic folding feed hopper with wedge fixing system.
· Feed hopper capacity 10.0 m³.
· 4080×1060 mm vibrating feeder .
· 2-deck preliminary screenbox. Top deck – 2120×1060 mm Grizzly, bottom deck – rubble blanking mat or various aperture wire mesh
(available as optional extra).
· A two-way dirt chute is provided to discharge to the product conveyor or the optional dirt conveyor when fitted.
· Caterpillar C9 Tier III Acert diesel engine developing 172kW (230 hp) @ 1800 rpm.
· 1000 mm wide plain troughed product conveyor with a discharge height of 3905 mm.
· Product conveyor can be hydraulically raised and lowered for transport and maintenance purposes.
· Excellent under crusher access for removal of wire with hydraulic tilting conveyor system
· A hard wired umbilical control unit for the track motion, feeder stop/start and a stop button for the plant.
· Dust suppression sprays fitted as standard.
· Operator walkways and access ladder discharge height of 2300 mm.
· Overband magnetic separator with permanent magnet suspended over the main on plant product conveyor and complete with hydraulic drive.
· Single idler belt weigher with integrator and speed sensing wheel fitted to the main product conveyor.
· Hydraulic driven water pump assembly to provide a pressurized water supply to the dust suppression system.
· Plant mounted hydraulic pick breaker fitted to the side of the chassis.
· Electric re-fuelling pump kit.
· Radio remote control.
· Engine fire extinguisher system.
· Plant lighting mast.