COPPER ORE PROPERTY
Composition: copper , copper sulphide
Functional use: Copper ore stone can be made into:piping,electrical applications,architecture and industry,household products,coinage,biomedical applications,chemical applications,miscellanea etc.
The high copper prices of recent years are producing a substantial supply response. Copper ore a valuable mineral source for all countries. The biggest copper mines are in Chile and North America, every year many thousands of tonnes of copper ore were produced, The copper ores are extracted by either traditional mining (open pit or underground) or by leaching, and 90 percent of the copper ore was mined from open pit. The copper is then recovered using physical and chemical techniques.
Copper ore is an ore which can be smelted in a furnace along with a piece of tin ore to create a bronze bar. Copper ore, along with tin ore, are the first ores a player can mine using the Mining skill.
Industrial use of copper ore stone:
Copper is found in nearly every home and vehicle, in parts and appliances, and in instruments used in all aspects of modern living, infrastructure and technology. In many respects, modern life would not have been possible without copper.
How copper is mined and copper ore mining crushing plant:
Copper is mined either at open pit copper ore mines or underground copper ore mines.
First the copper ore is blasted, loaded and transported to the primary crushers. Then the ore is crushed and screened, with the fine sulfide ore (~-0.5 mm) going to froth flotation cells for recovery of copper.
In the primary crusher, the ore is broken into smaller pieces of less than 25 centimetres in diameter. Crushed ore is then loaded on to a conveyor belt which takes it to the storage bin. In the storage bin, ball mills and other grinding machine grind the ore until it is a fine powder.
During the crushing process, NFLG has improved the capacity and end crushing products with our secondary crusher and tertiary crusher. The total energy consumption is reduced considerably.
Comparing the operation efficiency of Symons cone crusher and hydraulic cone crusher, we find Symons cone crusher achieved better results in tertiary crushing. And if installing the same number of secondary and tertiary crushers, a part of operation is transmitted from tertiary to secondary crushers where the liner wear is three times less, which significantly influences on the cost reduction in the crushing process.
As a major mining crushing equipment manufacturer in China, we can supply our clients with jaw crusher, cone crusher, impact crusher and industrial grinding mill etc. Our jaw crusher is a good primary crusher, our impact crusher is widely used as secondary crusher, our cone crusher including Symons cone crusher, hydraulic cone crusher can be used as secondary crusher and tertiary crusher. Beyond this, we also supply ball mill, vertical mill, Raymond mill, trapezium mill etc. to our clients.